Set Channel Speed operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in Table 143.
Table 143 Set Channel Speed Operation
DescriptionItem
The name of the port that the channel speed is set.Port
The channel speed set.
1: 1 Gbps, 2: 2 Gbps, 4: 4 Gbps, 8: 8 Gbps, Auto: Auto mode.
Speed(Gbps)
The number of ports where the channel speed is set.Num. of Ports
Set Command Device (CommandDev) Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Install],Set CommandDev,,Normal end,,,Seq.=xxxxx
+{LDKC:CU:LDEV,CommandDev}=[{0x00:0xXX:0xXX,Disable},{0x00:0xXX:0xXX,Enable}],
Num. of LDEVs=2
[Install]
Install function
Set CommandDev
Set CommandDev operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in Table 144.
Table 144 Set CommandDev Operation
DescriptionItem
The LDKC, CU, and LDEV numbers of the logical volume where the command device is
set
LDKC:CU:LDEV
Indicates whether the command device setting is enabled or disabled
Disable or Enable will appear.
CommandDev
The number of logical volumes where the command device is setNum. of LDEVs
XP24000/XP20000 Audit Log User and Reference Guide 179
To Next Page
Loading...
