[Install]
Install function
System Tuning
System tuning operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in Table 156.
Table 156 System Tuning Operation
DescriptionItem
The serial number.Serial No.
The IP address mode set.IP Address Mode
The IP address set.IP Address
The subnet mask set.Subnet Mask
The WDCP set.WDCP
The DDUMP set.DDUMP
The type of power supply.Power Supply Type
The Disk Unit (DKU) mounting location.Disk Unit (DKU)
The type of AC-BOX.AC-BOX
The number of AC-BOX.Num. of AC-BOXs
The mounting location of the port.Port
Indicates the range of the CU number which the port belongs.CU Number
The emulation type.Emulation
The number of ports.Num of Ports
The Disk Adapter (DKA) mounting location.DKA
The Disk Adapter (DKA) transfer rate.Transfer Rate
The number of Disk Adapters (DKA).Num.of DKAs
The LDKC number and the CU number.LDKC:CU
XP24000/XP20000 Audit Log User and Reference Guide 189
To Next Page
Loading...
