HP StorageWorks XP20000/XP24000 - Disk Array - Page 188

DescriptionItem
The type of AC-BOX.Power Supply Type
The Disk Unit (DKU) mounting location.Disk Unit (DKU)
The type of AC-BOX.AC-BOX
The number of AC-BOX.Num. of AC-BOXs
The LDKC number, the CU number and LDEV number.LDKC:CU: LDEV
Indicates the setting status of Destage.
ON: Execute write through operation (report the completion of the writing to the host
after the writing to the disk drive has completed).
OFF: Do not execute write through operation (report the completion of the writing to the
host when the data is written in the cache memory).
Destage
The number of LDEVs.Num. of LDEVs
The LPR name.LPR
The level of Cache Tuning.Cache Tuning
The number of LPRs.Num. of LPRs
Command ControlCommand Control
The local mode number.Mode
The setting status.
ON: Set, Off: Release
Set
The number of local modes.Num. of Modes
Setting executed from the debug window (Set: fix).Debug Mode
NOTE:
Only the changed items will be output.
System Tuning Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Install],System Tuning,,Normal end,,,Seq.=xxxxx
+Serial No.=64040
+IP Address Mode=Based on Serial Number
+IP Address=126.132.248
+Subnet Mask=255.0.0
+WDCP=ON
+DDUMP=ON
+Power Supply Type=3-phase AC Box(40A)
+{DKU,AC-BOX}=[{DKU-R1,1-phase AC Box(50A)}],Num. of AC-BOXs=1
+{Port,CU Number,Emulation}=[{1E,-,I-2107},{3E,00:10-00:1F,I-2107},{5E,-,I-2107},
{7E,-,I-2107}],Num. of Ports=4
+{DKA,Transfer Rate}=[{DKA-1AL,4},{DKA-1BL,4},{DKA-2ML,4},{DKA-2NL,4}],Num. of DKAs=4
+{LDKC:CU,LDEV,SSID}=[{0x00:0x00,0x00-0xff,0x0005}],Num. of SSIDs=1
Install Function188