HP StorageWorks XP20000/XP24000 - Disk Array - Page 187

+{DKU,AC-BOX}=[{DKU-R1,1-phase AC Box(50A)}],Num. of AC-BOXs=1
+{LDKC:CU:LDEV,Destage}=[{0x00:0x00:0x00,OFF}],Num. of LDEVs=1
+{LPR,Cache Tuning}=[{System,Level5}],Num. of LPRs=1
+{LPR,Command Control}=[{System,10}],Num. of LPRs=1
+{LPR,Mode,Set}=[{System,0,ON}],Num. of Modes=1
+Debug Mode=Set
[Install]
Install function
System Option
System Option operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in Table 155.
Table 155 System Option Operation
DescriptionItem
Indicates the setting status of Spare Disk Recover.
Interleave: Give priority to the access from the host while executing copy process, Full
speed: Give priority to the copy process.
Spare Disk Recover
Indicates the setting status of Disk Copy Pace.
Slower: Low speed, Medium: Medium speed, Faster: High speed
Disk Copy Pace
Indicates the setting status of Copy Operation (Correction Copy).
ON: Execute Correction Copy, OFF: Do not execute Correction Copy
Copy Operation
(Correction Copy)
Indicates the setting status of Copy Operation (Dynamic Sparing).
ON: Execute Dynamic Sparing, OFF: Do not execute Dynamic Sparing
Copy Operation
(Dynamic Sparing)
The method to allocate the serial number reported by Read Configuration Data command.
ON: Method supporting 4096, OFF: Traditional compatible method
Read Configuration
Data Mode
The operation when power supply is lost.
Memory Backup Mode: Set to Memory Backup Mode
Destage Mode: Set to Destage Mode
Power Lost Mode
The cache segment size
Cache Segment
Size
The size of the cache on Side A.SideA
The size of the cache on Side B.SideB
The threshold to report link failure.
Link Failure
Threshold
XP24000/XP20000 Audit Log User and Reference Guide 187