Detailed information displays for this operation, as shown in Table 167.
Table 167 Volume-Format(H) Operation
DescriptionItem
The LDKC number, the CU number, and LDEV numberLDKC:CU:LDEV
The number of LDEVs being setNum. of LDEVs
NOTE:
The status does not change immediately after you execute an LDEV operation command. As a result,
errors may occur after you execute the command.
Volume-Format(Q) Operation
The logged information indicates that the Quick Format operation was only requested, but not finished.
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[LDEV],Volume-Format(Q),,Normal end,,,Seq.=xxxxx
+LDKC:CU:LDEV=[0x00:0x00:0x01,0x00:0x00:0x02,0x00:0x00:0x03,0x00:0x00:0x04,0x00:0x00:0x05,
0x00:0x00:0x06,0x00:0x00:0x07,0x00:0x00:0x08,0x00:0x00:0x09,0x00:0x00:0x0A],
Num. of LDEVs=XXX
[LDEV]
Logical Device function
Volume-Format(Q)
Volume-Format(H) operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in Table 168.
Table 168 Volume-Format(Q) Operation
DescriptionItem
The LDKC number, the CU number, and LDEV numberLDKC:CU:LDEV
The number of LDEVs being setNum. of LDEVs
NOTE:
The status does not change immediately after you execute an LDEV operation command. As a result,
errors may occur after you execute the command.
XP24000/XP20000 Audit Log User and Reference Guide 199
To Next Page
Loading...
