Volume-Restore(N) Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[LDEV],Volume-Restore(N),,Normal end,,,Seq.=xxxxx
+LDKC:CU:LDEV=[0x00:0x00:0x01,0x00:0x00:0x02,0x00:0x00:0x03,0x00:0x00:0x04,0x00:0x00:0x05,
0x00:0x00:0x06,0x00:0x00:0x07,0x00:0x00:0x08,0x00:0x00:0x09,0x00:0x00:0x0A],Num.of LDEVs=XXX
[LDEV]
Logical Device function
Volume-Restore(N)
Volume Restore (N) operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in Table 169.
Table 169 Volume Restore(N) Operation
DescriptionItem
The LDKC number, the CU number, and LDEV numberLDKC:CU:LDEV
The number of LDEVs being setNum. of LDEVs
NOTE:
The status does not change immediately after you execute an LDEV operation command. As a result,
errors may occur after you execute the command.
Logical Device (LDEV) Function200
To Next Page
Loading...
