HP StorageWorks XP20000/XP24000 - Disk Array - Page 207

DescriptionItem
Indicates WWN of the host deleted from the host group.WWN
The number of hosts (WWN) deleted from the host group.Num. of WWNs
Set Channel Speed Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[LUNM],Set Channel Speed,,Normal end,,,Seq.=xxxxx
+{Port,Speed(Gbps)}=[{XX,1},{XX,2},{XX,Auto},{XX,10}],Num. of Ports=4
[LUNM]
LUN Manager function
Set Channel Speed
Set Channel Speed operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in Table 179.
Table 179 Set Channel Speed Operation
DescriptionItem
The name of the port that the host speed (data transfer speed) is set.Port
The host speed set. The unit is Gbps (Gigabits per second). When Auto is set for the host
speed, Auto is output.
Speed(Gbps)
The number of ports where the host speed is set.Num. of Ports
Set Command Device (CommandDev) Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[LUNM],Set CommandDev,,Normal end,,,Seq.=xxxxx
+{LDKC:CU:LDEV,CommandDev}=[{0xXX:0xXX:0xXX,Disable},{0xXX:0xXX:0xXX,Enable}],
Num.of LDEVs=2
[LUNM]
LUN Manager function
Set CommandDev
Set CommandDev operation
Normal end
The operation has ended normally.
XP24000/XP20000 Audit Log User and Reference Guide 207