Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in Table 180.
Table 180 Set CommandDev Operation
DescriptionItem
The LDKC, CU, and LDEV numbers of the logical volume where the command device
setting is changed
LDKC:CU:LDEV
Indicates whether the command device setting is enabled or disabled
Disable or Enable will appear
CommandDev
The number of logical volumes where the command device setting is changedNum. of LDEVs
Set Command Device Security (CommandDev Sec) Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[LUNM],Set CommandDevSec,,Normal end,,,Seq.=xxxxx
+{LDKC:CU:LDEV,CommandDevSec}=[{0xXX:0xXX:0xXX,Disable},{0xXX:0xXX:0xXX,Enable}],
Num.of LDEVs=2
[LUNM]
LUN Manager function
Set CommandDevSec
Set CommandDevSec operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in Table 181.
Table 181 Set CommandDev Sec Operation
DescriptionItem
The LDKC, CU, and LDEV numbers of the logical volume where the command device
security setting is changed
LDKC:CU:LDEV
Indicates whether the command device security setting is enabled or disabled
Disable or Enable will appear
CommandDevSec
The number of logical volumes that the command device security setting is changedNum. of LDEVs
LUN Manager (LUNM) Function208
To Next Page
Loading...
