HP StorageWorks XP20000/XP24000 - Disk Array - Page 214

Add.
1
ValueAdd.
1
ValueAdd.
1
ValueAdd.
1
Value
--3C (95)9673 (63)64B3 (31)32
1
Addresses outside parentheses = arbitrated-loop physical address (AL-PA). Addresses in parentheses = loop IDs.
Set Fibre Topology Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx,00:00,[LUNM],Set Fibre Topology,,Normal end,,,Seq.=xxxxx
+{Port,Fabric,Connection}=[{XX,Enable,FC-AL},{XX,Disable,FC-AL},{XX,Enable,P-to-P},
{XX,Disable,P-to-P}],
Num. of Ports=4
[LUNM]
LUN Manager function
Set Fibre Topology
Set Fibre Topology operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in Table 188.
Table 188 Set Fibre Topology Operation
DescriptionItem
The name of the port where the topology of Fibre Channel is changed.Port
Indicates whether the Fabric switch is enabled or disabled.
Disable or Enable is output.
Fabric
The connecting mode of the Fabric switch selected.
FC-AL: FC-AL is selected, P-to-P: P-to-P is selected
Connection
The number of ports where the topology of Fibre Channel is changed.Num. of Ports
Set Host Mode Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[LUNM],Set Host Mode,,Normal end,,,Seq.=xxxxx
+{Port,HostGrpID,Mode,Option[0:31],Option[32:63],Option[64:95]}=[{XX,0xXXX,0x00,0x20000000,
0x00000000,0x00000000},{XX,0xXXX,0x09,0x00080000,0x00000000,0x00000000}],
Num.of Host Groups=2
[LUNM]
LUN Manager function
Set Host Mode
LUN Manager (LUNM) Function214