HP StorageWorks XP20000/XP24000 - Disk Array - Page 216

[LUNM]
LUN Manager function
Set Security Switch
Set Security Switch operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in Table 191.
Table 191 Set Security Switch Operation
DescriptionItem
The name of the port where the LUN security setting is changed.Port
Indicates whether the LUN security setting is enabled or disabled.
Disable or Enable is output.
Switch
The number of ports where the LUN security setting is changed.Num. of Ports
Set Speed Mode Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[LUNM],Set Speed Mode,,Normal end,,,Seq.=xxxxxx
+CHA=CHA-1EL
++{Port Block,Mode}=[{A,Standard},{B,High Speed/MIX}],Num. of Blocks=2
+Num. of CHAs=2
[LUNM]
LUN Manager function
Set Speed Mode
Set Speed Mode operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
LUN Manager (LUNM) Function216