Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in Table 198.
Table 198 Drive Interrupt Operation
DescriptionItem
The mounting location of the PDEV (physical device).PDEV
Format Operation
The logged information indicates that the Format operation was only requested, but not finished.
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Maintenance],Format,,Normal end,,,Seq.=xxxxx
+PG=[1-1],Num. of PGs=1
+PG=[E1-1],Num. of PGs=1 (for an external volume)
+PG=[V1-1],Num. of PGs=1 (for a virtual volume)
+PG=[X1-1],Num. of PGs=1 (for a Dynamic Provisioning volume)
+LDEV=[0x00:0x03:0x2f],Num. of LDEVs=1
[Maintenance]
Maintenance function
Format
Format operation
Progress Error
Progress Error is the parameter output when a failure is detected while displaying the progress of the
Format process.
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in Table 199.
Table 199 Format Operation
DescriptionItem
The parity group number.PG
The number of parity groups.Num. of PGs
The LDEV number.LDEV
XP24000/XP20000 Audit Log User and Reference Guide 223
To Next Page
Loading...
