DescriptionItem
The number of LDEVs.Num. of LDEVs
NOTE:
The status does not change immediately after you execute an LDEV operation command. As a result,
errors may occur after you execute the command.
Format Stop Operation
This log information is output when the format process is suspended.
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Maintenance],Format Stop,,Normal end,,,Seq.=xxxxx
+PG=[1-1],Num. of PGs=1
+PG=[E1-1],Num. of PGs=1 (for an external volume)
+PG=[V1-1],Num. of PGs=1 (for a virtual volume)
+PG=[X1-1],Num. of PGs=1 (for a Dynamic Provisioning volume)
+LDEV=[0x00:0x03:0x2f],Num. of LDEVs=1
[Maintenance]
Maintenance function
Format Stop
Format Stop operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in Table 200.
Table 200 Format Stop Operation
DescriptionItem
The parity group number.PG
The number of parity groups.Num. of PGs
The LDEV number.LDEV
The number of LDEVs.Num. of LDEVs
Maintenance Function224
To Next Page
Loading...
