Pre Quick Format Stop Operation
NOTE:
This log information is output when the Quick Format process is suspended.
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Maintenance],Pre QuickFormat Stop,,
Normal end,,,Seq.=xxxxx
+PG=[1-1],Num. of PGs=1
+LDEV=[0x00:0x03:0x2f],Num. of LDEVs=1
[Maintenance]
Maintenance function
Pre Quick Format Stop
Pre Quick Format Stop operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in Table 201.
Table 201 Pre Quick Format Stop Operation
DescriptionItem
The parity group number.PG
The number of parity groups.Num. of PGs
The LDEV number.LDEV
The number of LDEVs.Num. of LDEVs
Quick Format Operation
The logged information indicates that the Quick Format operation was only requested, but not finished.
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Maintenance],Quick Format,,Normal end,,,
Seq.=xxxxx
+PG=[1-1],Num. of PGs=1
+LDEV=[0x00:0x03:0x2f],Num. of LDEVs=1
[Maintenance]
Maintenance function
Quick Format
XP24000/XP20000 Audit Log User and Reference Guide 225