28 XP Performance Control (Perf Ctrl)
Function
Change XP Performance Control Group (PerfCtrlGrp) Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[PerfCtrl],Change PerfCtrlGrp,,Normal end,,,Seq.=xxxxx +{PPC Group,
Priority,UpperLimit,Mode}=[{XXXXXXXXXXXXXXXX,Non-Prio,XXXXXXXX,IOPS}],
Num. of PPC Groups=1
[Perf Ctrl]
XP Performance Control (Perf Ctrl) function
Change PerfCtrlGrp
Change XP Performance Control Group (PerfCtrlGrp) operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in Table 213.
Table 213 Change PerfCtrlGrp Operation
DescriptionItem
The Perf Ctrl group name.PPC Group
The attribute of the host bus adapter in the Perf Ctrl group after change.
Prio: Prioritized WWN, Non-Prio: Non-prioritized WWN.
Priority
The upper limit value when the attribute is set to Non-Prio.
When the attribute is set to Prio, this value is not output.
Upper Limit
The type of rate used for upper limit control.
IOPS: I/O rate, KB/s: Transfer rate.
When the attribute is set to Prio, this value is not output.
Mode
The number of Perf Ctrl groups that the setting was changed.
Num. of PPC
Groups
XP24000/XP20000 Audit Log User and Reference Guide 237
To Next Page
Loading...
