Clear PPC Info Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Perf Ctrl],Clear PPC Info,,Normal end,,,Seq.=xxxxx
[Perf Ctrl]
XP Performance Control (Perf Ctrl) function
Clear PPC Info
Clear PPC Info operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Default Set Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Perf Ctrl],Default Set,Kind=WWN,Normal end,,,
Seq.=xxxxx
[Perf Ctrl]
XP Performance Control (Perf Ctrl) function
Default Set
Default Set operation
Kind=WWN
WWN is selected as the parameter. This operation uses the following parameters, as shown in Table
214.
Table 214 Parameters for Default Set Operation
DescriptionParameter
The setting for the port tab is initialized.Port
The setting for the WWN tab is initialized.WWN
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295).
XP Performance Control (Perf Ctrl) Function238
To Next Page
Loading...
