HP StorageWorks XP20000/XP24000 - Disk Array - Page 240

Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295).
Detailed Information
Detailed information displays for this operation, as shown in Table 216.
Table 216 Set All Prio Port Operation
DescriptionItem
The setting status of the All Thresholds value in the port tab.
Enable: All Thresholds value is set.
Disable: All Thresholds value is cancelled.
AllPriority
The All Thresholds value set.
This value is output only when the All Thresholds value is set.
Threshold
The rate type of the All Thresholds value.
IOPS: I/O rate, KB/s: Transfer rate.
This value is output only when the All Thresholds value is set.
Mode
Set All Priority (Prio) WWN Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Perf Ctrl],Set All Prio WWN,,Normal end,,,Seq.=xxxxx
+{AllPriority,Threshold,Mode}={Enable,XXXXXXXX,IOPS}
[Perf Ctrl]
XP Performance Control (Perf Ctrl) function
Set All Prio WWN
Set All Prio WWN operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295).
Detailed Information
Detailed information displays for this operation, as shown in Table 217.
Table 217 Set All Prio WWN Operation
DescriptionItem
The setting status of the All Thresholds value in the WWN tab
Enable: All Thresholds value is set
Disable: All Thresholds value is cancelled
AllPriority
The All Thresholds value set.
This value is output only when the All Thresholds value is set
Threshold
XP Performance Control (Perf Ctrl) Function240