Detailed information displays for this operation, as shown in Table 220.
Table 220 Set Prio WWN Operation
DescriptionItem
Indicates WWN of the host bus adapter. WWN is a 16-digit number in the hexadecimal
format.
WWN
The attribute set to the host bus adapter.
Prio: Prioritized WWN, Non-Prio: Non-prioritized WWN.
Priority
The upper limit value when the attribute is set to non-prioritized WWN.
This value is not output when the attribute is set to prioritized WWN.
Upper Limit
The type of rate used for the upper limit control.
IOPS: I/O rate, KB/s: Transfer rate.
This value is not output when the attribute is set to prioritized WWN.
Mode
The number of WWNs of the host bus adapters that the setting is changed.Num. of WWNs
Indicates WWN of the host bus adapter. WWN is a 16-digit number in the hexadecimal
format.
WWN
Update Port WWN Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Perf Ctrl],Update Port WWN,,Normal end,,,
Seq.=xxxxx +{Mode,WWN,PPC Name,Priority}=[{Add WWN,0xXXXXXXXXXXXXXXXX,XXXXXXXXXXXXXXXX,
Non-Prio}, ++Port=[1A,3A],Num. of Ports=2],Num. of WWNs=1
[Perf Ctrl]
XP Performance Control (Perf Ctrl) function
Update Port WWN
Update Port WWN operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in Table 221.
Table 221 Update Port WWN Operation
DescriptionItem
The operation executed.
Add WWN: New registration of WWN (the host bus adapter is subject to monitoring)
Delete WWN: Deletion of WWN (the host bus adapter is not subject to monitoring)
Mode
XP24000/XP20000 Audit Log User and Reference Guide 243
To Next Page
Loading...
