HP StorageWorks XP20000/XP24000 - Disk Array - Page 258

DescriptionItem
The CU number of the paired CU.RCU
The SSID.SSID
The port number of MCU.MCU Port
The port number of RCU.RCU Port
The number of port pairs set.Num of Port Pairs
Add RCU Operation
Example 1 (CU Free is used)
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[RCU],Add RCU,,Normal end,,,Seq.=xxxxx
+{S/N,MCU LDKC,RCU LDKC,Path Gr.ID,Controller ID,Min.Path,MIH Time(s),
Round Trip Time(ms),Incident,FREEZE}={99999,0x00,0x00,Default,4,08,015,001,
only to RCU host,Disable}
++{MCU Port,RCU Port}=[{1E,3E},{5E,7E},{1F,3F},{5F,7F},{1G,3G},{5G,7G},{1H,3H},{5H,7H}],
Num of Port Pairs=8
Example 2 (CU Free is not used)
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[RCU],Add RCU,,Normal end,,,Seq.=xxxxx
+{S/N,MCU LDKC,MCU,RCU LDKC,RCU,SSID,Controller ID,Min.Path,MIH Time(s),
Round Trip Time(ms),Incident,FREEZE}={99999,0x00,0x3F,0x00,0x7F,0x0004,4,08,015,001,
only to RCU host,Disable}
++{MCU Port,RCU Port}=[{1E,3E},{5E,7E},{1F,3F},{5F,7F},{1G,3G},{5G,7G},{1H,3H},{5H,7H}],
Num of Port Pairs=8
[RCU]
Remote Control Unit function
Add RCU
Add Remote Control Unit operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in Table 235.
Table 235 Add RCU Operation
DescriptionItem
Indicates a serial number of the registered RCU device.S/N
The LDKC number of the connected LDKC.MCU LDKC
Remote Control Unit (RCU) Function258