Delete RCU Operation
Example 1 (CU Free is used)
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[RCU],Delete RCU,,Normal end,,,Seq.=xxxxx
+{S/N,MCU LDKC,RCU LDKC,Path Gr.ID,Controller ID}={99999,0x00,0x00,Default,5}
Example 2 (CU Free is not used)
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[RCU],Delete RCU,,Normal end,,,Seq.=xxxxx
+{S/N,MCU LDKC,MCU,RCU LDKC,SSID}={99999,0x00,0x3F,0x00,0x0004}
[RCU]
Remote Control Unit function
Delete RCU
Delete Remote Control Unit operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in Table 238.
Table 238 Delete RCU Operation
DescriptionItem
The serial number of the device of RCU deleted.S/N
The LDKC number of the connected LDKC.MCU LDKC
The LDKC number of the paired LDKC.RCU LDKC
The path group ID of the RCU deleted. When the path group ID is a default setting,
Default is output.
Path Gr.ID
The controller ID of the RCU deleted.Controller ID
The CU number of the connected CU.MCU
The SSID of the RCU deleted.SSID
Remote Control Unit (RCU) Function262
To Next Page
Loading...
