user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[RCU],Delete Path,,Normal end,,,Seq.=xxxxx
+{S/N,MCU LDKC,RCU LDKC,Path Gr.ID,Controller ID}={99999,0x00,0x00,Default,4}
++{MCU Port,RCU Port}=[{1E,3E},{5E,7E},{1F,3F},{5F,7F},{1G,3G},{5G,7G},{1H,3H},{5H,7H}],
Num of Port Pairs=8
Example 2 (CU Free is not used)
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[RCU],Delete Path,,Normal end,,,Seq.=xxxxx
+{S/N,MCU LDKC,MCU,RCU LDKC,RCU,SSID,Controller ID}={99999,0x00,0x3F,0x00,0x7F,0x0004,5}
++{MCU Port,RCU Port}=[{1E,3E},{5E,7E},{1F,3F},{5F,7F},{1G,3G},{5G,7G},{1H,3H},{5H,7H}],
Num of Port Pairs=8
[RCU]
Remote Control Unit function
Delete Path
Delete Path operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in Table 237.
Table 237 Delete Path Operation
DescriptionItem
The serial number of the device of RCU where the path has been deleted.S/N
The LDKC number of the connected LDKC.MCU LDKC
The LDKC number of the paired LDKC.RCU LDKC
The path group ID of the path deleted. When the path group is a default setting, Default
is output.
Path Gr.ID
The controller ID of the RCU where the path has been deleted.Controller ID
The CU number of the connected CU.MCU
The CU number of the paired CU.RCU
Indicates SSID.SSID
The port number of MCU.MCU Port
The port number of RCU.RCU Port
The number of path pairs deleted.Num of Port Pairs
XP24000/XP20000 Audit Log User and Reference Guide 261
To Next Page
Loading...
