DescriptionItem
The timer type set.
System: System timer, Local: Local timer, None: No timer (system timer)
Timer Type
Add Pair Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00, [TC],Add Pair,,Normal end,,,Seq.=xxxxxx
+{M-VOL(LDKC:CU:LDEV),R-VOL(LDEV),S/N,LDKC,SSID,ControllerID,Type, Initial Copy,
Fence Level,Copy Pace, Priority,Diff,CFW,DFW,TS, CTG, Error Level,Result}=
-{0x00:0x00:0x00,0xFF,99999,0x00,0x0004,4,Async,Entire,Never,15,032,Auto,
Only M-VOL,-,-,0x00,Group,Normal End},
(snip)
-(snip), Num.of Pairs=xx
[TC]
TrueCopy for Mainframe function (for IBM z/OS)
Add Pair
Add Pair operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in Table 253.
Table 253 Add Pair Operation
DescriptionItem
The LDKC, CU, and LDEV numbers of the volume specified to the main volume when
the pair is created
M-VOL
(LDKC:CU:LDEV)
The LDEV number of the volume specified to the remote volume when the pair is createdR-VOL (LDEV)
The serial number of the deviceS/N
The LDKC number of the paired LDKCLDKC
Indicates SSIDSSID
The controller ID.Controller ID
The update copy mode set; Sync: Synchronous mode, Async: Asynchronous modeType
The initial copy mode set; Entire: Copy all, None: Do not copyInitial Copy
The fence level set (the condition that MCU rejects the write operation to the main
volume)
Never: No condition, Data: S-VOL data, Status: S-VOL status
Fence Level
TrueCopy (TC) for Mainframe Function280
To Next Page
