DescriptionItem
The initial copy speed set (the number of tracks you can copy at a time)Copy Pace
The priority of the initial copy operation set (scheduling order)Priority
The unit of the differential management set: Auto, Cylinder, TrackDiff
Indicates whether the setting to copy the CFW data to the remote volume is enabled
or not. Only M-VOL: Copy to main volume only is enabled.
Copy To R-VOL: Copy to main and remote volume is enabled
CFW
Indicates whether DFW use to the remote volume is set or not. This value is output only
when the synchronous pair is created. When the asynchronous pair is created, a
hyphen (-) is output.
Not required: DFW not required, Required: DFW required
DFW
Indicates whether or not the host I/O time stamp is transferred to R-VOL when the pair
is created. This value is output only when the synchronous pair is created. When the
asynchronous pair is created, a hyphen (-) is output.
Enable: transferred, Disable: not transferred
TS
The consistency group number of the consistency group (CT group) that the created
pair belongs to. This value is output when the asynchronous pair is created only.
CTG
The error level set (handling if trouble occurs). This value is output when the
asynchronous pair is created only.
Volume: Volume (suspended by appropriate pair); Group: Group (suspended by
consistency group)
Error Level
The result of operation
Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
Result
The number of created pairsNum. of Pairs
Change Async Option Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx,00:00,[TC],Change Async Option,,Normal end,,,Seq.=xxxxxx
+{CLPR,Rate(%)}={00,050}
[TC]
TrueCopy for Mainframe function (for IBM z/OS)
Change Async Option
Change Async Option operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
XP24000/XP20000 Audit Log User and Reference Guide 281
To Next Page
