Detailed Information
Detailed information displays for this operation, as shown in Table 254.
Table 254 Change Async Option
DescriptionItem
The CLPR number.CLPR
The specified pending update data rate.Rate (%)
Change Consistency Group (CTG) Option Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[TC], Change CTG Option,,Normal end,,,Seq.=xxxxx
+{LDKC,CTG, Offloading(min.),Inflow Control,Copy Pending(min.),RCU Ready(min.),
Timer Type}=
{0x00,0x00,090,Enable,05,05,System}
[TC]
TrueCopy for Mainframe function (for IBM z/OS)
Change CTG Option
Change Consistency Group Option operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in Table 255.
Table 255 Change CTG Option Operation
DescriptionItem
The LDKC number.LDKC
The consistency group number of the consistency group (CT group) that the option is
changed.
CTG
The value set to the offloading timer of the sidefile. The unit is minute.Offloading (min.)
Indicates whether the inflow control to the cache is enabled or disabled.
Enable: Setting is enabled, Disable: Setting is disabled
Inflow Control
The setting value for Time Out (Copy Pending). The unit is minute. When Time Out (Copy
Pending) is set to 0 (zero), None is output.
Copy Pending
(min.)
The setting value for Time Out (RCU ready). The unit is minute. When Time Out (RCU
ready) is set to 0 (zero), None is output.
RCU Ready (min.)
TrueCopy (TC) for Mainframe Function282
To Next Page
