HP StorageWorks XP20000/XP24000 - Disk Array - Page 283

DescriptionItem
The timer type set.
System: System timer, Local: Local timer, None: No timer (system timer)
Timer Type
Change Option Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[TC],Change Option,,Normal end,,,Seq.=xxxxxx
+{ Parallel Initial Copy,Path Blockade Watch(s),Path Blockade SIM Watch(s),
Service SIM,
Parallel Initial Copy(CU)}={128,45,70,Not Report,Disable}
+{LDKC,CU,Service SIM,PPRC Support,SCP Time(s), Parallel Initial Copy(CU)}=
-{0x00,0x00,Not Report,Yes,600,4},{0x00,0x01,Not Report,Yes,600,4},{0x00,0x02,
Not Report,
Yes,600,4},{0x00,0x03,Not Report,Yes,600,4},{0x00,0x04,Not Report,Yes,600,4},
(snip)
-(snip), Num.of CUs=255
[TC]
TrueCopy for Mainframe function (for IBM z/OS)
Change Option
Change Option operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in Table 256.
Table 256 Change Option Operation
DescriptionItem
The maximum number of initial copy operations set. (1 to 512)Parallel Initial Copy
The path blockade watch period set. The unit is second.
Path Blockade
Watch(s)
The path blockade SIM watch period set. The unit is second.
Path Blockade SIM
Watch(s)
Indicates whether the remote copy related SIM is reported or not.
Report, Not Report
Service SIM
Indicates whether the parallel operation of initial copy by CU is enabled or not.
Enable, Disable
Parallel Initial Copy
(CU)
The LDKC number.LDKC
The CU number of the CU on the primary site.CU
XP24000/XP20000 Audit Log User and Reference Guide 283