Universal Replicator for Mainframe function (for IBM z/OS)
Delete-Pair
Delete-Pair operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed information
Detailed information displays for this operation, as shown in Table 266.
Table 266 Delete-Pair Operation
DescriptionItem
The LDKC, CU, and LDEV numbers of the primary data volume
If it is set by using a spreadsheet, N/A will be output for CU and LDEV numbers when
the Type is S-VOL.
P-VOL(LDKC:CU:LDEV)
The LDKC, CU, and LDEV numbers of the secondary data volume
If it is set by using a spreadsheet, N/A will be output for CU and LDEV numbers when
the Type is P-VOL.
S-VOL(LDKC:CU:LDEV)
The mirror IDMirrorID
The serial number of the logical device (storage system)S/N
The controller ID
N/A is output when CTRLID is set by using a spreadsheet.
CTRLID
The primary and secondary of the deleted volume
P-VOL: Primary, S-VOL: Secondary
Type
The delete range
Volume: Volume range, Group: Group range
Range
The delete mode
Normal: Normal mode, Force: Force mode
Delete Mode
The result of operation
Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
Result
The number of pairsNum. of Pairs
Edit-EXCTG (Extended Consistency Group) Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx,00:00,[UR],Edit-EXCTG,Add,Normal end, Seq=xxxxx
+{LDKC,EXCTG}={0x00,0x00}
XP24000/XP20000 Audit Log User and Reference Guide 295
To Next Page
