HP StorageWorks XP20000/XP24000 - Disk Array - Page 296

++{LDKC,JNLG,MirrorID,S/N,CTRLID,Cmd.Dev.(LDKC:CU:LDEV),Result}=[{0x00,0x00,0x01,
65432,5,0x00:
0x20:0x00,Normal end},{0x00,0x01,0x01,65432,5,0x00:0x20:0x00,Normal end}]
+{LDKC,EXCTG}={0x00,0x01}
++{LDKC,JNLG,MirrorID,S/N,CTRLID,Cmd.Dev.(LDKC:CU:LDEV),Result}=[{0x01,0x00,0x01,
65433,5,0x00:
0x20:0x00,Normal end}]
+Num. of EXCTGs=2
[UR]
Universal Replicator for Mainframe function (for IBM z/OS)
Edit-EXCTG
Extended consistency group operation
Add
Add is selected as the parameter. This operation uses the following parameters:
Table 267 Parameters for Edit-EXCTG Operation
DescriptionParameter
Add journal groups to the extended consistency group.Add
Remove journal groups from the extended consistency group.Remove
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed information
Detailed information displays for this operation, as shown in Table 268.
Table 268 Edit-EXCTG Operation
DescriptionItem
The extended consistency groups LDKC numberLDKC
The number of the extended consistency groupEXCTG
The journal group's LDKC numberLDKC
The journal group numberJNLG
The mirror IDMirrorID
The serial number of the logical device (storage system)S/N
The controller IDCTRLID
The LDKC, CU, and LDEV numbers of the remote command device
Cmd.Dev.
(LDKC:CU:LDEV)
Universal Replicator (UR) for Mainframe Function296