HP StorageWorks XP20000/XP24000 - Disk Array - Page 302

Assign is selected as the parameter. The operation uses the following parameters as shown in Table
275.
Table 275 Parameters for R-Cmd.Dev. Operation
DescriptionItem
The remote command device is assigned.Assign
The remote command device is released.Release
Normal end
The operation has ended normally.
Seq.=xxxxxx
Serial number of log information (0000000000 to 4294967295)
Detailed information
Detailed information displays for this operation, as shown in Table 276.
Table 276 R-Cmd.Dev. Operation
DescriptionItem
The LDKC number that the journal group belongsLDKC
The journal group numberJNLG
The mirror IDMirrorID
The LDKC, CU, and LDEV numbers of the remote command device
The hyphen (-) displays under the following conditions:
• When assigning a remote command device without specifying a remote
command device as a parameter
• When releasing a remote command device
Cmd.Dev.(LDKC:CU:LDEV)
The result of operation
Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
Result
The number of mirrors changedNum. of Mirrors
Resume-Pair Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[UR],Resume-Pair,,Normal end,,,Seq.=xxxxx
+{P-VOL(LDKC:CU:LDEV),S-VOL(LDKC:CU:LDEV),MirrorID,S/N,CTRLID,Priority,Range,
M-JNLG,R-JNLG,
Error Level,Resync Mode,Result}=
[{0x00:0x00:0x00,0x00:0x20:0x00,0x00,65432,5,7,Volume,0x02,0x00,Group,Normal,
Normal end},
-{0x00:0x00:0x01,0x00:0x20:0x01,0x00,65432,5,7,Group,0x02,0x00,Group,Normal,
Normal end}],
Num. of Pairs=2
[UR]
Universal Replicator for Mainframe function (for IBM z/OS)
Universal Replicator (UR) for Mainframe Function302