Resume-Pair
Resume-Pair operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Table 277 Resume-Pair Operation
DescriptionItem
The LDKC, CU, and LDEV numbers of the primary data volumeP-VOL(LDKC:CU:LDEV)
The LDKC, CU, and LDEV numbers of the secondary data volume
When it is set by using a spreadsheet, N/A is output for CU and LDEV numbers.
S-VOL(LDKC:CU:LDEV)
The mirror IDMirrorID
The serial number of the logical device (storage system)S/N
The controller ID
N/A is output when it is set by using a spreadsheet.
CTRLID
The priority of copyPriority
The range to restore the pair
Group: Group range. Volume: Volume range
Range
The master journal group numberM-JNLG
The restore journal group number
N/A is output when it is set by using a spreadsheet.
R-JNLG
The error level
Group: Group level. Volume: Volume level
Error Level
Indicates the resync mode
Normal: normal resync, Delta: delta resync, Return to standby: return to standby status
Resync Mode
The result of operation
Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
Result
The number of pairsNum. of Pairs
Suspend-Pair Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx,00:00,[UR],Suspend-Pair,,Normal end,,,Seq.=xxxxxx
+{P-VOL(LDKC:CU:LDEV),S-VOL(LDKC:CU:LDEV),MirrorID,S/N,CTRLID,Type,S-VOL Write,
Range,
XP24000/XP20000 Audit Log User and Reference Guide 303
To Next Page
