Suspend Mode,Result}=}=[{0x00:0x00:0x00,0x00:0x20:0x00,0x00,65432,5,P-VOL,Disable,
Volume,
Flush, Normal end},
-{0x00:0x00:0x01,0x00:0x20:0x00,0x01,65432,5,P-VOL,Disable,Volume,Flush,Normal end},
Num. of Pairs=2
[UR]
Universal Replicator for Mainframe function (for IBM z/OS)
Suspend-Pair
Suspend-Pair operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in Table 278.
Table 278 Suspend-Pair Operation
DescriptionItem
The LDKC, CU, and LDEV numbers of the primary data volume
If it is set by using a spreadsheet, N/A will be output for CU and LDEV numbers when
the Type is S-VOL.
P-VOL(LDKC:CU:LDEV)
The LDKC, CU, and LDEV numbers of the secondary data volume
If it is set by using a spreadsheet, N/A will be output for CU and LDEV numbers when
the Type is P-VOL.
S-VOL(LDKC:CU:LDEV)
The mirror IDMirrorID
The serial number of the logical device (storage system)S/N
The controller ID
N/A is output when CTRLID is set by using a spreadsheet.
CTRLID
Indicates whether the split data volume is a primary or secondary data volume
P-VOL: Primary, S-VOL: Secondary
Type
Indicates whether writing to the secondary volume is enabled or not
Disable: Disabled, Enable: Enabled
S-VOL Write
The split range
Volume: Volume range, Group: Group range
Range
The suspend mode
Purge: Purge mode, Flush: Flush mode
Suspend Mode
The result of operation
Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
Result
Universal Replicator (UR) for Mainframe Function304
To Next Page
