39 Virtual LVI / Virtual LUN (VLL) Function
Install Customized Volume (CV) Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[VLL],Install CV,,Normal end,,,Seq.=xxxxxx
+{PG,LDKC:CU:LDEV,Start LBA,Emulation,Size,Unit,System Disk }=
[{XX-XX-(X),0xXX:0xXX:0xXX, XXXXXXXX,OPEN-V,XXXXXXXX,KB,Disable},
{X-X-(X),0xXX:0xXX:0xXX,XXXXXXXX,OPEN-V,XXXXXXXX,KB,Disable}],Num. of LDEVs=2
[VLL]
Virtual LVI / Virtual LUN function
Install CV
Install Customized Volume (CV) operation
No parameter
No parameter is selected in the above example. This operation uses the following parameters, as
shown in Table 280.
Table 280 Parameters for Install CV Operation
DescriptionParameter
Unformatted Install CV. The logged information indicates that the volume was created.Non Format
Quick Formatted Install CV. The logged information indicates that the formatting was
only requested, but not finished.
Quick Format
NOTE:
No parameters are selected for any case other than those described in this table. The logged information
indicates that the formatting was only requested, but not finished.
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
XP24000/XP20000 Audit Log User and Reference Guide 307
To Next Page
