DescriptionParameter
Quick Formatted Make Volume. The logged information indicates that the formatting
was only requested, but not finished.
Quick Format
NOTE:
No parameters are selected for any case other than those described in this table. The logged information
indicates that the formatting was only requested, but not finished.
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in Table 283.
Table 283 Make Volume Operation
DescriptionItem
The parity group number
The parity group number whose first letter is E indicates that an external volume is present
in the parity group.
PG
The LDKC, CU, and LDEV numbersLDKC:CU:LDEV
The emulation typeEmulation
The user-specified capacitySize
The unit of the CV capacity. The unit varies according to the setting.
KB: For open-system volume
Cyl: For mainframe-system volume
LBA: When LBA is specified
Unit
Indicates system disk status
Enable: Enabled, Disable: Disabled
System Disk
The number of LDEVsNum. of LDEVs
Set SSID Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[VLL],Set SSID,,Normal end,,,Seq.=xxxxxx
+{SSID,LDKC:CU:LDEV}=[{XXXXX,0xXX:0xXX:0xXX},{XXXXX,0xXX:0xXX:0xXX}],Num. of SSIDs=2
[VLL]
Virtual LVI / Virtual LUN function
Set SSID
XP24000/XP20000 Audit Log User and Reference Guide 309
To Next Page
