DescriptionItem
The specified upper limit of the migration time.
The upper limit of the migration time is displayed by the number from 10 to 120. The
unit is minute.
TimeRequiredMax(min)
The specified upper limit of the disk usage rate.
The upper limit of the disk usage rate is displayed by the number from 10 to 100. The
unit is percent (%).
AvailabilityMax(%)
The specified maximum number of the volumes that are migrated in a same time.
The maximum number of the volumes that are migrated in a same time is displayed by
the number from 1 to 40.
VolulmeMax
The number of settings. 1 is always output.Num. of Data
Set Reserved Vol Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Auto LUN],Set Reserved Vol,,Normal end,,,Seq.=xxxxxx
+{Set,LDKC:CU:LDEV,Result}=[{Reserved,0x00:0x00:0x00,Normal end},
{ Reserved,0x00:0x00:0x01,Normal end},{ Reserved,0x00:0x00:0x02,Normal end},
{ Reserved,0x00:0x00:0x03,Normal end},{ Reserved,0x00:0x00:0x04,Normal end},
{ Reserved,0x00:0x00:0x05,Normal end},
{ Reserved,0x00:0x00:0x06,Normal end}] Num. of LDEVs = 7
[Auto LUN]
HP XP Auto LUN Software function
Set Reserved Vol
Set Reserved Vol operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in Table 295.
Table 295 Set Reserved Vol Operation
DescriptionItem
The operation executed to the logical volume.
Normal: Set to the normal volume
Reserved: Set to the reserved volume of HP XP Auto LUN Software
Set
The ID of the logical volume which the setting is changed. The number on the left of the
colon is an LDKC number, the number between the colons is a CU number and the
number on the right of the colon is an LDEV number.
LDKC:CU:LDEV
XP24000/XP20000 Audit Log User and Reference Guide 319
To Next Page
