Set Cache Residency Manager for z/OS (M/F DCR) Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Cache],Set M/F DCR,,Normal end,,,Seq.=xxxxx
+{LDKC:CU:LDEV,Mode,Prestaging,Start CC-HH,End CC-HH}=[{0x00:0x00:0x00,Bind,No,
XXXXXX-XX,XXXXXX-XX},{0x00:0x00:0x00,Priority,Yes,XXXXXX-XX,XXXXXX-XX}],Num. of LDEVs=2
[Cache]
Cache function
Set M/F DCR
Set M/F DCR operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in Table 42.
Table 42 Set M/F DCR Operation
DescriptionItem
The LDKC, CU, and LDEV numbers of the logical volume (for a mainframe system) where
the setting information for Cache Residency cache is added or changed.
LDKC:CU:LDEV
The setting mode of Cache Residency cache.
Bind: Bind, Priority: Priority
Mode
The prestaging target.
No: No (disables the prestaging mode)
Yes: Yes (enables the prestaging mode)
Prestaging
The starting cylinder number (CC) and the starting head number (HH) of the data resident
in Cache Residency cache.
Start CC-HH
The ending cylinder number (CC) and the ending head number (HH) of the data resident
in Cache Residency cache.
End CC-HH
The number of the logical volume (for a mainframe system) where the setting information
for Cache Residency cache is added or changed.
Num. of LDEVs
Set Open Cache Residency Manager (DCR) Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Cache],Set Open DCR,,Normal end,,,Seq.=xxxxx
+{LDKC:CU:LDEV,Mode,Prestaging,Start LBA,End LBA}=[{0x00:0x00:0x00,Bind,No,
XXXXXXXXXXXXXXXX,XXXXXXXXXXXXXXXX}],Num. of LDEVs=1
[Cache]
Cache function
XP24000/XP20000 Audit Log User and Reference Guide 85
To Next Page
Loading...
