Set Open DCR
Set Open DCR operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in Table 43.
Table 43 Set Open DCR Operation
DescriptionItem
The LDKC, CU, and LDEV numbers of the logical volume (for an open system) where the
setting information for Cache Residency cache is added or changed.
LDKC:CU:LDEV
The setting mode of Cache Residency cache.
Bind: Bind, Priority: Priority
Mode
The prestaging target.
No: No (disables the prestaging mode)
Yes: Yes (enables the prestaging mode)
Prestaging
The starting LBA number of the data resident in Cache Residency cache.Start LBA
The ending LBA number of the data resident in Cache Residency cache.End LBA
The number of the logical volume (for an open system) where the setting information for
Cache Residency cache is added or changed.
Num. of LDEVs
Cache Function86
To Next Page
Loading...
