HP StorageWorks XP20000/XP24000 - Disk Array - Page 91

12 XP Continuous Access Software Function
Add Consistency Group (CTG) Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Cnt Ac],Add CTG,,Normal end,,,Seq.=xxxxx
+{LDKC,CTG,Path,Offloading(s),Inflow Control,Copy Pending(min.),RCU Ready(min.)}=
{0x00,0x00,Fibre,090,Enable,05,05}
[Cnt Ac]
HP XP Continuous Access Software function
Add CTG
Add Consistency Group operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in Table 47.
Table 47 Add CTG Operation
DescriptionItem
The LDKC number.LDKC
The consistency group number of the consistency group (CT group) newly registered.CTG
The channel type of path interface.
Fibre: Fibre Channel
Path
The value set to the monitoring time of transfer to the side file. The unit is second.Offloading(s)
Indicates whether the inflow control to the cache is enabled or disabled.
Enable: Setting is enabled, Disable: Setting is disabled
Inflow Control
The setting value for Time Out (Copy Pending). The unit is minute. When Time Out (Copy
Pending) is set to 0 (zero), None is output.
Copy Pending
(min.)
The setting value for Time Out (RCU ready). The unit is minute. When Time Out (RCU
ready) is set to 0 (zero), None is output.
RCU Ready (min.)
XP24000/XP20000 Audit Log User and Reference Guide 91