HP StorageWorks XP20000/XP24000 - Disk Array - Page 92

Change Async Option Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Cnt Ac],Change Async Option,,Normal end,,,Seq.=xxxxx
+{CLPR,Rate(%),Delay Start(%),Delay Increase(%)}={00,050,030,040}
[Cnt Ac]
HP XP Continuous Access Software function
Change Async Option
Change Async Option operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in Table 48.
Table 48 Change Async Option
DescriptionItem
The CLPR number.CLPR
The value set to the pending update data rate.Rate (%)
The value set to the I/O Delay Start value (the threshold that the inflow control of
asynchronous copy starts).
Delay Start (%)
The value set to the I/O Delay Increase value (the threshold that the inflow control of
asynchronous copy increases).
Delay Increase (%)
Change Consistency Group (CTG) Option Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Cnt Ac],Change CTG Option,,Normal end,,,Seq.=xxxxx
+{LDKC,CTG, Offloading(s),Inflow Control,Copy Pending(min.),RCU Ready(min.)}=
{0x00,0x00,090,Enable,05,05}
[Cnt Ac]
HP XP Continuous Access Software function
Change CTG Option
Change Consistency Group Option operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
XP Continuous Access Software Function92