Detailed information displays for this operation, as shown in Table 51.
Table 51 Change Pair Option Operation
DescriptionItem
The port number, host group number and LUN of the primary volume where the pair
option is changed sequentially.
P-VOL
(Port-G-ID-LUN)
The changed fence level (the condition that MCU rejects Write to the primary volume).
Never: No condition, Data: S-VOL data, Status: S-VOL status
Fence Level
The error level changed (handling if trouble occurs).
This value is output when the pair option of the asynchronous pair is changed only.
Group: Group (suspended by consistency group),
LU: LU (appropriate LU only is suspended)
Error Level
The result of operation.
Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
Result
The number of changed pairs.Num. of Pairs
Delete Consistency Group (CTG) Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Cnt Ac],Delete CTG,0x00:0x00,Normal end,,,Seq.=xxxxxx
[Cnt Ac]
HP XP Continuous Access Software function
Delete CTG
Delete Consistency Group operation
0x00
This operation uses the following parameters, as shown in Table 52.
Table 52 Parameters for Delete CTG Operation
DescriptionParameter
The LDKC number and the consistency group (CT group) number of the consistency group
deleted.
LDKC number: 0x00 to 0x01, CT group number: 0x00 to 0x7F
0x00:0x00
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
XP24000/XP20000 Audit Log User and Reference Guide 95
To Next Page
Loading...
