Function Switch Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Cnt Ac],Function Switch,,Normal end,,,Seq.=xxxxx
+ Switch=0001 0100 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
[Cnt Ac]
HP XP Continuous Access Software function
Function Switch
Function Switch operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in Table 53.
Table 53 Function Switch Operation
DescriptionItem
Each bit position (on/off) of the function switch information assigned by 64 bits. The
beginning of the string is bit 0 and the ending of it is bit 63. "0" indicates the bit is
off, and "1" indicates the bit is on.
In the example above, bit 3 and bit 5 are on and the other bits are off.
Switch
Paircreate Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Cnt Ac],Paircreate,,Normal end,,,Seq.=xxxxxx
+{P-VOL(Port-G-ID-LUN),S-VOL(Port-G-ID-LUN),S/N,LDKC,ID,ControllerID,Type,
Initial Copy,
Fence Level,Copy Pace,Priority,Diff,CTG, Error Level,Result}=
-{1A-0x00-0x000,GR-0xFE-0x3FF,99999,0x00,Default,4,Async,Entire,Never,15,032,
Auto,0x00,
Group,Normal End}, (snip)
-(snip), Num. of Pairs=xx
[Cnt Ac]
HP XP Continuous Access Software function
Paircreate
Paircreate operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
XP Continuous Access Software Function96
To Next Page
Loading...
