Detailed information displays for this operation, as shown in Table 54.
Table 54 Paircreate Operation
DescriptionItem
The port number, host group number, and LUN of the volume specified to the primary
volume when the pair is created sequentially
P-VOL (Port-G-ID-LUN)
The port number, host group number, and LUN of the volume specified to the
secondary volume when the pair is created sequentially
S-VOL (Port-G-ID-LUN)
The serial number of the deviceS/N
The LDKC number of the paired LDKCLDKC
The path group ID or SSID
When the path group ID is default setting, the output is Default
ID
The controller IDController ID
The update copy mode set
Sync: Synchronous mode, Async: Asynchronous mode
Type
The initial copy mode set
Entire: Copy all, None: Do not copy
Initial Copy
The fence level set (the condition that MCU rejects the write operation to the primary
volume)
Never: No condition, Data: S-VOL data, Status: S-VOL status
Fence Level
The initial copy speed set (the number of tracks you can copy at one time)Copy Pace
The priority of the set initial copy operation (scheduling order)Priority
The unit of the differential management set
Auto, Cylinder, Track
Diff
The consistency group number of the consistency group (CT group) that the created
pair belongs to. This value is output when the asynchronous pair is created only.
CTG
The error level set (handling if trouble occurs)
This value is output when the asynchronous pair is created only.
Group: Group (suspended by consistency group),
LU: LU (appropriate LU only is suspended)
Error Level
The result of operation
Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
Result
The number of created pairsNum. of Pairs
XP24000/XP20000 Audit Log User and Reference Guide 97
To Next Page
Loading...
