Pairresync Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Cnt Ac],Pairresync,,Normal end,,,Seq.=xxxxxx
+{P-VOL(Port-G-ID-LUN),S-VOL(Port-G-ID-LUN),Fence Level,Copy Pace,Priority,Range,
Error Level,Change ESAM,Quorum Disk ID,Result}=
-{1A-0x00-0x000,1B-0x00-0x000,Never,15,256,-,-,Yes,0x7F,Normal End},
{1A-0x00-0x001,1B-0x00–0x001,Never,15,256,Group,Group,No,-,Normal End},(snip)
-(snip), Num. of Pairs=xx
[Cnt Ac]
HP XP Continuous Access Software function
Pairresync
Pairresync operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in Table 55.
Table 55 Pairresync Operation
DescriptionItem
The port number, host group number and LUN of the primary volume in the restored
pair sequentially.
P-VOL (Port-G-ID-LUN)
The port number, host group number and LUN of the secondary volume in the
restored pair sequentially.
S-VOL (Port-G-ID-LUN)
The fence level set (the condition that MCU rejects Write to the primary volume).
Never: No condition, Data: S-VOL data, Status: S-VOL status
Fence Level
The initial copy speed set (the number of tracks you can copy at a time).Copy Pace
The priority of restoring operation set (scheduling order).Priority
The resume range set (the range to restore the asynchronous pair). This value is
output when the asynchronous pair is restored only.
Group: Group (all asynchronous pairs in the consistency group),
LU: LU (appropriate asynchronous pair only)
Range
The error level set (handling if trouble occurs). This value is output when the
asynchronous pair is restored only.
Group: Group (all asynchronous pairs in the consistency group)
LU: LU (appropriate asynchronous pairs only)
Error Level
Indicates if the XP Continuous Access pair changes to a ESAM pair.
Yes: Changes to a ESAM pair, No: Remains as a XP Continuous Access pair
Change ESAM
XP Continuous Access Software Function98
To Next Page
Loading...
