Figure 4 StoreEasy 1x50 with the P441 controller
1. P441 controller
2. D6000 enclosure
3. Connection to SAS port 1 on the primary I/O module (left drawer) of D6000 enclosure
4. Connection to SAS port 1 on the primary I/O module (right drawer) of D6000 enclosure
Figure 7 (page 14) shows an example of a 1x50 system with a P441 connected to D2000/D3000
enclosures in a single domain configuration.
Single domain cabling diagrams with D2000 Disk Enclosures
The following diagrams show different StoreEasy systems in single domain configurations with
the D2000 Disk Enclosure. With these cabling diagrams, SAS daisy chains are used to connect
the disk enclosures together.
NOTE: The cabling diagram in Figure 5 (page 12) is exactly the same for the StoreEasy 1440
using the P222 controller.
Single domain cabling diagrams with D2000 Disk Enclosures 11
To Next Page
Loading...
