HP t730 Thin Client User Manual

BIOS setting Default value Other values
Embedded Security
Device(System Security)
Disable Enable
Reset to Factory Setting Do not reset Reset
Measure boot variables/
devices to PCR1
Disable Enable
OS management of
Embedded Security Device
Disable Enable
Reset of Embedded Security
Device through OS
Disable Enable
No PPI provisioning Disable Enable
Allow PPI policy to be
changed by OS
Disable Enable
Legacy Support Enable Disable (Note: The default value may be varied depends on the OS)
Secure Boot Disable Enable (Note: The default value may be varied depends on the OS)
Clear Secure Boot Keys Don’t Clear Clear
Key Ownership HP Keys Custom Keys
Fast Boot Disable Enable (Note: The default value may be varied depends on the OS)
Setup Browse Mode Enable Disable
Password Prompt on F9 &
F12
Enable Disable
Runtime Power Management Enable Disable
Idle Power Savings Extended Normal
ACPI S3 PS2 Mouse Wake Up Enable Disable
S5 Maximum Power Savings Disable Enable
S5 Wake on LAN Disable Enable
CPU Fan Check Enable Disable
POST Messages Disable Enable
Press the ESC key for Startup
Menu
Displayed Hidden
After Power Loss O On, Previous State
POST Delay (in seconds) None 5, 10, 15, 20, 60
Bypass F1 Prompt on
Conguration Changes
Disable Enable
Remote Wakeup Boot Source Local Hard Drive Remote Server
Power on Sunday – Saturday Disable Enable
Power on Time (hh:mm) 00:00 00:00:23:59
Serial Port A IO=3F8; IRQ=4 Disable, IO=3F8h; IRQ=3, IO=2F8h; IRQ=4, IO=2F8h; IRQ=3
Serial Port B IO=2F8h; IRQ=3 Disable, IO=3F8h; IRQ=4, IO=3F8h; IRQ=3, IO=2F8h; IRQ=4
Changing BIOS Settings from the HP BIOS Congure Utility (HPBCU) 31

HP t730 Thin Client Specifications

General

Brand	HP
Model	t730 Thin Client
Category	Computer Hardware
Language	English