HP TFT7600 G2 User Manual

Operational overview 17
Vertical position
The V position option displays a slider bar to enable the adjustment of the screen's vertical position.
The center of the bar is obtained from the factory-preset value for Vertical Position.
Clock
The Clock option displays a slider bar to enable the adjustment of the Horizontal Clocks.
Phase
The Phase option displays a slider bar to enable the adjustment of the analog signals phase.
Advanced
The Advanced option provides access to the following options:
• OSD settings menu
• Exit sub-menu
OSD settings
The OSD settings option provides access to the following options:
• Lock OSD settings
o Yes
o No
• Timeout
• V position
• H position
• Exit sub-menu
Lock OSD settings
The Lock OSD settings option locks or unlocks the OSD settings.
Timeout
The Timeout option displays a slider bar at the right side of the OSD display to enable the adjustment of OSD
timeout. The timeout ranges from 5 to 60 seconds with 1-second intervals. The default setting is 10 seconds.
Vertical position
The V position option enables the location of the OSD window to move up or down on the screen.
Horizontal position
The H position option enables the location of the OSD window to move left or right on the screen.

HP TFT7600 G2 Specifications

General

Resolution	1280 x 1024
Aspect Ratio	5:4
Brightness	250 cd/m²
Contrast Ratio	1000:1
Display Size	17.0 in
Form Factor	1U
Viewing Angle	160° (horizontal), 160° (vertical)
VESA Mount	No
Operating Temperature	10°C to 35°C
Storage Temperature	-20°C to 60°C
Product Type	Rack Mount LCD Monitor