Using infrared (IR) devices
Your computer may have a built-in IR receiver, or IR extender cable that connects to your computer.
To determine which type of IR receiver is installed on your computer, see additional documentation
that came with your computer.
Built-in receiver
Some computer models include a remote sensor (IR receiver) that is located on the front of the
computer. For more information about this internal remote sensor, see the other documentation that
came with your computer. The remote control works with this sensor.
External IR devices
1. Connect the IR extender cable (red connector) (2) into the IR IN port (1) on the computer.
2. Some external IR devices (3) connect to the computer with a USB connector (4).
ENWW Using infrared (IR) devices 7
To Next Page
Loading...
