E52
Connecting the Display
WARNING
The tape and stop pin may only be removed from those monitors
equipped with a standing base when the base is pulled up. Otherwise, you
may be injured by the protruding sections of the stand.
Product Handling with Care : When you lift up or move the product, Do Not
hold or touch the front part of LCD panel. It will damage the panel. (Hold
the monitor by the stand body or plastic cover.)
Before setting up the monitor, ensure that the power to the monitor, the
computer system, and other attached devices are turned off.
Connecting the stand base
1. Place the monitor with its front facing downward on a cushion or soft cloth.
2. Assemble the Stand Base into the Stand Body.
Do not remove the stop pin until the stand base is assembled to the stand body
and the monitor is in the upright position.
Stop Pin
Stand Base
Stand Body
English
English
To Next Page
Loading...
