Wireless LAN 802.11b/g Device
42
8.2.2 Tools Menu
Figure 34: AP Mode Tools menu
There are five Tools menu choices:
Switch to Station Mode (Section 8.2.2.1)
Disable Wireless (Section 8.2.2.2)
Change Admin Password…. (Section 8.2.2.3)
Options…. (Section 8.2.2.4)
Status…. (Section 8.2.2.5)
8.2.2.1 Switch to Station Mode
Switching to Station Mode is necessary when there is already an Access Point, gateway,
or wireless broadband router and you wish to connect this HP PC to the other machine. If
circumstances change and it becomes necessary to use your HP PC in Station Mode (as a
client) after converting to Access Point Mode this can be easily achieved by selecting the
Wireless SoftAP™ Tools menu selection Switch to Station Mode.
To Next Page
Loading...
