Wireless LAN 802.11b/g Device
65
Note:
In order to enter the key it is necessary to use the following format:
ASCII (allows letters ranging from a – z and numbers from 0 – 9)
o
5 characters for 40 bit encryption
o
13 characters for 128 bit encryption (stronger form of security)
HEX (allows letters ranging from a – f and numbers from 0 – 9)
o
10 characters for 40 bit encryption
o
26 characters for 128 bit encryption (stronger form of security)
7. Select Apply
WEP security is now established and your HP PC should be able to communicate with your
wireless network.
To check the status of your connection refer to section 8.2.2.5.
To Next Page
Loading...
