To Next PageTo Next PageWhat to do if HP XP 9000 Storage ANTX5124W error occurs?
This message appears if the Compatible XRC pairs are deleted when a number of sidefiles of the Compatible XRC pairs remain in cache, and a time-out error might occur. When the time-out error occurs, the XQUERY TSO command or SCDATA operation must be performed to check that no sidefiles of the Compatible XRC pairs exist on cache before deleting the Compatible XRC pairs.
How to fix HP Storage error ANTX5001E during delete operation?
If the ANTX5001E message appears during a delete operation for Compatible XRC pairs, it may indicate a problem with the delete pair operation. To resolve this, execute the LISTSESS command to confirm whether the session remains. If the session remains, execute the TERMSESS command to terminate the session.
What to do if HP Storage shows ANTX5105E error during delete operation?
If the ANTX5105E message appears during a delete operation for Compatible XRC pairs, it may indicate a problem with the delete pair operation. To resolve this, execute the LISTSESS command to confirm whether the session remains. If the session remains, execute the TERMSESS command to terminate the session.
How to resolve Time-out error on HP Storage?
To resolve a time-out error, perform the XQUERY TSO command to check that no sidefiles of the Compatible XRC pairs exist on cache before resuming the Compatible XRC pairs.
How to troubleshoot HP XP 9000 Storage ANTX5123W error?
To troubleshoot the ANTX5123W error, perform the XDELPAIR operation to delete the pairs, and then perform the XADDPAIR operation to create the pairs again.
What to do if HP XP 9000 Storage shows ANTA5107E error?
If the Compatible XRC program product is not installed, install it.
How to fix HP Storage ANTX5104E (RC=0901) error?
To fix the ANTX5104E error, execute RESUME operation to the suspended pairs. When you execute XADDPAIR command, wait 5 minutes after executing XDELPAIR command.
What to do if HP Storage displays ANTX5106E LIC ERROR?
To address the ANTX5106E LIC ERROR, REAS=00000020, perform the RESUME operation again.
Why can't I change the CLPR name on my HP Network Hardware?
You can't change the CLPR name because the name is either already in use or is reserved by the system. To resolve this, enter a different name.
Provides a high-level explanation of the Compatible XRC feature and its operations.
Specifies the necessary hardware and software components for primary and secondary sites to use Compatible XRC.
Highlights key factors like block size and SDM tuning affecting Compatible XRC performance.
Explains how option settings, like "Do not Block", affect storage system behavior.
Provides step-by-step instructions on how to open the Compatible XRC window.
Guides users through setting and applying Compatible XRC options via the Remote Web Console.
Directs users to other HP documentation for troubleshooting errors in Compatible XRC and Remote Web Console.
Provides solutions for specific console messages encountered during Compatible XRC operations.
Describes three levels of write data control based on sidefile capacity when using Cache Level block option.
Explains four levels of write data control based on sidefile capacity when Do not Block option is disabled.
Describes the items and functionality within the main Compatible XRC window.
Details the fields and options available in the Change Option window for configuring Compatible XRC.
General
