HP XP7 - User Manual

Other manuals for HP XP7

Configuration Guide158 pages

Owner's Guide101 pages

Questions and Answers

B
Brandi SmithSep 9, 2025
Why does HP XP7 Storage pool usage level exceed the threshold?
- M
  Mariah BurkeSep 9, 2025
  If the pool usage level exceeds the threshold in HP Storage, it could be due to too many THP V-VOLs associated with the pool, too much data stored in the pool, or the pool's capacity being insufficient, or even the threshold being too low. To resolve this, consider adding pool-VOLs to increase the pool's capacity, reclaim zero pages to release space, or set a larger value for the pool's threshold.
B
bwalkerAug 25, 2025
What to do if SIM code such as 620XXX, 625000 or 626XXX was issued on HP XP7 Storage?
- S
  steven50Aug 25, 2025
  If you receive SIM code such as 620XXX, 625000 or 626XXX with your HP Storage, it means that the pool usage level exceeds the threshold. To fix this, add pool-VOLs to the pool to increase the free space in the pool.
R
Ross WilliamsAug 25, 2025
What to do if SIM code 622XXX was issued on HP XP7 Storage?
- R
  Richard HernandezAug 26, 2025
  If you receive SIM code 622XXX with your HP Storage, it means that the usage of the pool has reached 100%. To fix this, add pool-VOLs to the pool to increase the free space in the pool.
F
foxjeffreySep 23, 2025
What to do if copy times are extended on HP XP7 due to P-VOL's HDD error?
- C
  courtney99Sep 23, 2025
  If copy times are extended, it might be due to an error with the P-VOL's HDD or external storage. Check for any errors and correct them.
R
Russell PhelpsSep 9, 2025
Why does HP XP7 Storage Remote Web Console timeout frequently?
- G
  Gary AdamsSep 10, 2025
  When operating the Remote Web Console for HP Storage, timeouts can occur frequently if the Remote Web Console computer is under heavy load and cannot respond to the SVP, or if the time-out period is set too short. To address this, wait for a while before trying the operation again, or verify the setting of the environment parameter for the Remote Web Console RMI time-out period.
S
Stephen JordanSep 14, 2025
Why is the ALARM LED on my HP Storage system illuminated?
- K
  Kimberly HaleySep 14, 2025
  The ALARM LED might be on due to a temperature issue in the area. Power down the disk array, reduce the room temperature to the recommended operating range, and then power the storage system back on. If the area temperature is not the problem, contact the support center for assistance.
R
Robert CarrSep 4, 2025
Why the Disable/ Enable or the Enable/Disable button on the Data Retention window is unavailable on HP XP7 Storage?
- V
  Vanessa WadeSep 4, 2025
  If The Disable/ Enable or the Enable/Disable button on the Data Retention window is unavailable on HP Storage, it is because you have been making changes in the Data Retention window, but the changes have not been applied to the storage system. Apply the changes first, then perform the extension lock operation.
B
bsmithSep 4, 2025
Why the number of days in the Retention Term does not decrease on HP XP7?
- M
  Megan TranSep 4, 2025
  The number of days in the Retention Term is calculated based on the operating time of the storage system.
E
Eric WigginsSep 23, 2025
How to fix HP XP7 Storage volume pairs not displaying correctly?
- T
  thomascorySep 23, 2025
  If the volume pairs are not displaying correctly, select the correct volumes.
A
Anthony LarsonAug 29, 2025
Why open-systems hosts cannot read from or write to a volume on HP XP7 Storage?
- J
  Jeff ForbesAug 30, 2025
  If open-systems hosts cannot read from or write to a volume on HP Storage, it is because the volume is protected by the read-only attribute. Write failure is reported as an error message.