E Data Retention GUI reference
Abstract
This appendix describes the Data Retention windows, wizards, and dialog boxes used to assign
access attributes to open-system volumes.
Data Retention window
Use the Data Retention window to assign an access attribute to open-system volumes.
DescriptionItem
Select the LDKC that contains the desired CU groups.LDKC
Select the CU group that contains the desired CUs from the following:CU Group
• 00-3F: CUs from 00 to 3F appear in the tree.
• 40-7F: CUs from 40 to 7F appear in the tree.
• 80-BF: CUs from 80 to BF appear in the tree.
• C0-FE: CUs from C0 to FE appear in the tree.
A list of CUs. Selecting a CU provides the selected CU information in the volume list on the
right of the tree.
Tree
This tree appears only the CUs that include volumes to which access attributes can be
actually set.
Lists information about the CU selected in the tree. See the table below for details.Volume list
Enables or disables enhanced volume protection.Expiration Lock
• Disable > Enable: Indicates the expiration lock is disabled. You can change an access
attribute to read/write when the retention term is over.
• Enable > Disable: Indicates the expiration lock is enabled. You cannot change an access
attribute to read/write even when the retention term is over.
Data Retention window 365
To Next Page
Loading...
Need help?
General
